[op5-users] merlin & check results

[Mattias Ryrlén]

You could use a dummy check and name it the same on both noc and poller,
except on the poller the check includes your poller name in the reply, and
same goes for noc.
then you can see who did what check.


On Thu, Sep 10, 2009 at 8:33 PM, Russell Jennings <russ at geekwhiz.com> wrote:

> Hello,
>
> So, i've done more fiddling, and i have a question...
>
> I have 2 VM's running merlin and nagios, vm1 is the noc and vm2 is the
> poller. What I'm not sure of, is how to verify that the poller is
> performing the check and not the NOC.
>
> I have a service check (check_tcp) defined in the NOC to check the
> port availability of vnc on another host. the host is in a hostgroup,
> and merlin is configured (as per the readme) to use that hostgroup for
> the poller.
>
> but when i look at the VNC logs, I see the check coming from the NOC
> and not the poller.
>
> So.. a little lost on where to go from here. Any thoughts?
>
> Thanks,
> Russell
>
> _______________________________________________
> op5-users mailing list
> op5-users at lists.op5.com
> http://lists.op5.com/mailman/listinfo/op5-users
>



-- 
Vänliga hälsningar / Best Regards
Mattias Ryrlén

__________________________
op5 AB
Första Långgatan 19
SE-413 27 Göteborg
Mobil: +46 735-17 70 99
Support: +46 31-774 09 24
www.op5.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.op5.com/pipermail/op5-users/attachments/20090910/2a770e1c/attachment.html