[op5-users] How to Geomap ?

[Jean-Marc LE FEVRE]

Le 28 nov. 09 à 11:20, Russell Jennings a écrit :

> Not at all what i'm asking.
>
> For me, I get "channel disconnected" which, i suspect is because my
> nagvis install isn't working (can't seem to get it to play with
> merlin). So, i imagine if i get that backend working, the frontend
> will fall in... but thats theory. I agree the geopmap widget is a big
> sell for me as well.
>
>

Sorry didn't understand ... English is not my mother language and now  
I wish at listen at school in english lesson :(
Nagvis is working correctly for the 1.4 branch. When I tested with 1.5  
branch I had a doubt because of sqlite intégration.


I've checked futher for error with firebug and realize that in network  
performance I get error message 'from" the swf by studying the POST  
request / response. (please notice It doesn't appear in the console)
I had some certificates error , file disk permissions, some few bug  
due to php 5.3, but  now : I GET IT WORKING !!! using nagvis that was  
in op5 virtual appliance.
I've set up my google maps key and  now I can play with it.



The only features that I didn't find how to use is the location  
feature. I've set up all fields, but i can't see how to save the datas
I understand that the link feature is depending of the location  
feature, and so I couldn't test it.

About geomap for sure it is an important part of the solution. It is  
sexy, in fashion, could be usefull and save me lots of time because I  
don't need to create nagvis geographical maps by hand...

Anyway, thank you all for time spending and for all theses advices you  
gave me !!!




> On Nov 28, 2009, at 5:16 AM, Jean-Marc LE FEVRE wrote:
>
>> I can use nagvis, but if I wanted nagvis without geomap, I wouldn't
>> even looked into ninja....
>>
>>
>> Le 28 nov. 09 à 11:13, Russell Jennings a écrit :
>>
>>> can you use nagvis, otherwise? or does it not work at all for you?
>>>
>>>
>>> On Nov 28, 2009, at 5:04 AM, Jean-Marc LE FEVRE wrote:
>>>
>>>> Le 27 nov. 09 à 13:47, Roman Kyrylych a écrit :
>>>>
>>>>> Jean-Marc LE FEVRE wrote:
>>>>>> Le 26 nov. 09 à 12:58, Roman Kyrylych a écrit :
>>>>>>> BTW where did you get Geomap?
>>>>>>
>>>>>> I didn't write down here I find all release I tested
>>>>>> (unfortunelty)
>>>>>> But I found all I get on sourceforge, op5 sites, and nagvis git.
>>>>>> All
>>>>>> version I used are public release.
>>>>>> The lastest 1.4 and 1.5 release of nagvis I tried came from
>>>>>> respectivly the nagvis nightly build version and  http://nagvis.git.sourceforge.net
>>>>>
>>>>> This is the root of all problems.
>>>>> There are lots of changes going on in NagVis now,
>>>>> so Geomap can be considered as broken until 1.5 final release.
>>>>>
>>>>> In fact, there is no Geomap in nagvis-1.4 branch at all:
>>>>> http://nagvis.git.sourceforge.net/git/gitweb.cgi?p=nagvis/nagvis;a=tree;h=refs/heads/nagvis-1.4;hb=refs/heads/nagvis-1.4
>>>>> It was removed long time ago:
>>>>> http://nagvis.git.sourceforge.net/git/gitweb.cgi?p=nagvis/nagvis;a=commitdiff;h=47772ae243e9c09f69eb735104543f3c956089c9
>>>>>
>>>>> Can you point me to NagVis release tarball that contains Geomap?
>>>>> You also mentioned op5 sites, can you point me to a place where
>>>>> NagVis
>>>>> is provided there. Same for NagVis 1.4 nightly builds.
>>>>>
>>>>
>>>> In my memory, I went on the nagvis official site and click on get
>>>> nightly buld.
>>>>
>>>>> It is just that Geomap is not supposed to be released until NagVis
>>>>> 1.5,
>>>>> and until it will be released it is only available (in a working
>>>>> state)
>>>>> as experimental part of the latest op5 Monitor.
>>>>
>>>> Lots of version of nagvis have netmap and geomap in the archive.
>>>>
>>>>>
>>>>>>> And op5's nagvis repo is not available at http://git.op5.org/ 
>>>>>>> git/
>>>>>>> So I suppose you have installed monitor-nagvis package,
>>>>>>
>>>>>> Nop, what is it ?
>>>>>
>>>>> It's a package of a customized NagVis based on version 1.4.1
>>>>> with added integration with Ninja.
>>>>> It is avaliable as part of the latest release op5 Monitor,
>>>>> There is a tarball and a virtual appliance with a trial version
>>>>> on op5 website.
>>>>>
>>>>
>>>> I've tried the op5 virtual appliance, and geomap work on it.
>>>> I've seen no mention of monitor-nagvis thought.
>>>>
>>>> I made a copy of nagvis to my installation with no success.
>>>> I'll look deeper on this way as I don't ned op5 monitor, just ninja
>>>> and merlin.
>>>>
>>>>
>>>>
>>>>> -- 
>>>>> Roman Kyrylych
>>>>> Software engineer
>>>>> N-iX LLC
>>>>> Solutions for Your success
>>>>> http://www.n-ix.com
>>>>> _______________________________________________
>>>>> op5-users mailing list
>>>>> op5-users at lists.op5.com
>>>>> http://lists.op5.com/mailman/listinfo/op5-users
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> op5-users mailing list
>>>> op5-users at lists.op5.com
>>>> http://lists.op5.com/mailman/listinfo/op5-users
>>>
>>> _______________________________________________
>>> op5-users mailing list
>>> op5-users at lists.op5.com
>>> http://lists.op5.com/mailman/listinfo/op5-users
>>
>> _______________________________________________
>> op5-users mailing list
>> op5-users at lists.op5.com
>> http://lists.op5.com/mailman/listinfo/op5-users
>
> _______________________________________________
> op5-users mailing list
> op5-users at lists.op5.com
> http://lists.op5.com/mailman/listinfo/op5-users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.op5.com/pipermail/op5-users/attachments/20091128/2f96fa6d/attachment.html