[op5-users] How to Geomap ?

[Russell Jennings]

Not at all what i'm asking.

For me, I get "channel disconnected" which, i suspect is because my  
nagvis install isn't working (can't seem to get it to play with  
merlin). So, i imagine if i get that backend working, the frontend  
will fall in... but thats theory. I agree the geopmap widget is a big  
sell for me as well.


On Nov 28, 2009, at 5:16 AM, Jean-Marc LE FEVRE wrote:

> I can use nagvis, but if I wanted nagvis without geomap, I wouldn't
> even looked into ninja....
>
>
> Le 28 nov. 09 à 11:13, Russell Jennings a écrit :
>
>> can you use nagvis, otherwise? or does it not work at all for you?
>>
>>
>> On Nov 28, 2009, at 5:04 AM, Jean-Marc LE FEVRE wrote:
>>
>>> Le 27 nov. 09 à 13:47, Roman Kyrylych a écrit :
>>>
>>>> Jean-Marc LE FEVRE wrote:
>>>>> Le 26 nov. 09 à 12:58, Roman Kyrylych a écrit :
>>>>>> BTW where did you get Geomap?
>>>>>
>>>>> I didn't write down here I find all release I tested  
>>>>> (unfortunelty)
>>>>> But I found all I get on sourceforge, op5 sites, and nagvis git.
>>>>> All
>>>>> version I used are public release.
>>>>> The lastest 1.4 and 1.5 release of nagvis I tried came from
>>>>> respectivly the nagvis nightly build version and  http://nagvis.git.sourceforge.net
>>>>
>>>> This is the root of all problems.
>>>> There are lots of changes going on in NagVis now,
>>>> so Geomap can be considered as broken until 1.5 final release.
>>>>
>>>> In fact, there is no Geomap in nagvis-1.4 branch at all:
>>>> http://nagvis.git.sourceforge.net/git/gitweb.cgi?p=nagvis/nagvis;a=tree;h=refs/heads/nagvis-1.4;hb=refs/heads/nagvis-1.4
>>>> It was removed long time ago:
>>>> http://nagvis.git.sourceforge.net/git/gitweb.cgi?p=nagvis/nagvis;a=commitdiff;h=47772ae243e9c09f69eb735104543f3c956089c9
>>>>
>>>> Can you point me to NagVis release tarball that contains Geomap?
>>>> You also mentioned op5 sites, can you point me to a place where
>>>> NagVis
>>>> is provided there. Same for NagVis 1.4 nightly builds.
>>>>
>>>
>>> In my memory, I went on the nagvis official site and click on get
>>> nightly buld.
>>>
>>>> It is just that Geomap is not supposed to be released until NagVis
>>>> 1.5,
>>>> and until it will be released it is only available (in a working
>>>> state)
>>>> as experimental part of the latest op5 Monitor.
>>>
>>> Lots of version of nagvis have netmap and geomap in the archive.
>>>
>>>>
>>>>>> And op5's nagvis repo is not available at http://git.op5.org/git/
>>>>>> So I suppose you have installed monitor-nagvis package,
>>>>>
>>>>> Nop, what is it ?
>>>>
>>>> It's a package of a customized NagVis based on version 1.4.1
>>>> with added integration with Ninja.
>>>> It is avaliable as part of the latest release op5 Monitor,
>>>> There is a tarball and a virtual appliance with a trial version
>>>> on op5 website.
>>>>
>>>
>>> I've tried the op5 virtual appliance, and geomap work on it.
>>> I've seen no mention of monitor-nagvis thought.
>>>
>>> I made a copy of nagvis to my installation with no success.
>>> I'll look deeper on this way as I don't ned op5 monitor, just ninja
>>> and merlin.
>>>
>>>
>>>
>>>> -- 
>>>> Roman Kyrylych
>>>> Software engineer
>>>> N-iX LLC
>>>> Solutions for Your success
>>>> http://www.n-ix.com
>>>> _______________________________________________
>>>> op5-users mailing list
>>>> op5-users at lists.op5.com
>>>> http://lists.op5.com/mailman/listinfo/op5-users
>>>
>>>
>>>
>>> _______________________________________________
>>> op5-users mailing list
>>> op5-users at lists.op5.com
>>> http://lists.op5.com/mailman/listinfo/op5-users
>>
>> _______________________________________________
>> op5-users mailing list
>> op5-users at lists.op5.com
>> http://lists.op5.com/mailman/listinfo/op5-users
>
> _______________________________________________
> op5-users mailing list
> op5-users at lists.op5.com
> http://lists.op5.com/mailman/listinfo/op5-users