[op5-users] PNP and Nacoma Questions

[Joe Precious]

On 22/07/2009 11:59, Per Åsberg wrote:
> Joe Precious skrev:
>
>    
>>> Ninja uses iframes for add-ons like PNP4Nagios, Nacoma, etc.
>>> The links should open within Ninja by default so something must be wrong here.
>>> How did you configure your 'pnp4nagios_path' in config.php?
>>> What does the link look like in the browser? Could you send an example?
>>> It should be something like
>>> https://<server_address>/ninja/index.php/pnp/?host=<selected_host>  for hosts.
>>>
>>>        
>> I did have the path's wrong.  I changed them and now I get the correct
>> icon, with the correct link when I hover over it, but when I click on
>> it, and get an error (with the Ninja iframe) saying /etc/pnp/index.php
>> cannot be found.  I have the following in my config file:-
>>
>> /**
>>   * Web path to Pnp4nagios
>>   * If installed, change path below or set to false if not
>>   */
>> $config['pnp4nagios_path'] = '/usr/local/nagios/share/perfdata';
>>
>> /**
>> *       File system path to where PNP keeps the perfdata rrd and xml files
>> *       Only used if 'pnp4nagios_path' !== false
>> */
>> $config['pnp4nagios_config_path'] = '/usr/local/nagios/etc/pnp/config.php';
>>
>> Something must be wrong though!  I have restarted Nagios since making
>> the config changes.
>>      
>
> Yes, something is wrong. pnp4nagios_path should contain the web path and
> should point to the directory where pnp has index.php (and of course it has to
> be accessible from the webroot). If you used the Nagios quickstart
> installation at http://nagios.sourceforge.net/docs/3_0/quickstart.html I would
> assume something like /nagios/pnp but you should check your setup.
>
> Regards,
>
> /Per
>    
Per (and Mattias!)

Thanks - I had the configuration wrong.  All working now.

However, when I first changed the config I had it wrong so it didn't 
work (missing /) and after correcting, no amount of restarting Nagios or 
Merlin would get it to see the corrected config.  However, I left it for 
a hour or so and when I came back it was suddenly all working!  Is there 
some trick to get Ninja to see the updated config?

Joe
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.op5.com/pipermail/op5-users/attachments/20090722/2c2bdf97/attachment.html